Do it yourself
How do I install my thatsmyspot.com.au parking bollard?
Its very simple to do – just drill three holes into your level concrete parking floor and fit your thatsmyspot.com.au parking bollard to the ground with the three hextop ankascrews supplied with your parking space protector. You’ll need to use a concrete drill with a 8 mm or 10 mm diameter drill bit and a drill a hole just 50 mm deep into the concrete so that it’s BCA compliant. If you need help with installation, please contact us and we can assist with installation.
We generally recommend that your parking bollard be installed approximately one-third of the way – or between 1.0 and 1.8 metres into the parking bay from the outer edge. Of course this depends on ease and safety of entry and egress from your parking spot.
After my thatsmyspot.com.au parking bollard is installed, can I later move it to a different location? Of course you can. Just remove the ankascrews and away you go and you can move the parking space protector to a new location!